Circular Saw
Semi Automatic



  1. Column type down feed system with sealed bearings.
  2. Variable blade speed controlled by inverter.
  3. Hydraulically controlled dual-vise full stroke clamping system.
  4. Roller bearing and hydraulically clamped carbide blade guide system.
  5. PLC control for all electric and hydraulic functions.
  6. Saw frame height selector gauge.
  7. Power driven wire brush.
  8. Hydraulic blade tension.
  9. Anti-Vibration roller.
  10. Powered movable guide arm with hydraulic lock (Only for H-1010).
  11. Independent electric cabinet and control panel.
  12. Idler wheel motion detector with blade stalling and breakage shut-off.
  13. Automatic saw frame return selector.
  14. Cutting fluid flushing hose for machine cleaning.
  15. Automatic chip conveyor.
  16. Projection light.
  17. One M42 bi-metal saw blade.
  18. One set of tools and tool box.


  1. Out of square detector.
  2. Dead roller stock table,
    ¥2 M long for H-8070
    ¥3 M long for H-1010
  3. Power roller stock table
    ¥2 M long for H-8070
    ¥3 M long for H-1010


Model H-8070
Capacity 700 mm (27.5")
800 x 700 mm (31.5" W x 27.5" H) min. clamp width 230 mm (9")
Blade Speed 15 to 70 m/min. (50 to 230 fpm) (INVERTER)
Motor Blade Drive 7.5 kw (10HP)
Hyd. Pump 2.2 kw (3HP)
Coolant Pump 0.2 kw (1/4HP)
Blade Size 7600 x 54 x 1.6 mm (299" x 2" x 0.063")
Blade Tension Hydraulic
Index Length 450 mm (17.5")
Machine Weight 5500 kg (12100 lb)
Floor Space (L x W) 3950 x 2220 mm (141" x 87.5")
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without prior notice.
© Niran Tools & Machinery. All Rights Reserved (Terms of Use)
Site developed & maintained by : Om Sai Infotech